Über dieses Produkt
Mit einem Frequenzbereich von 10 MHz bis 2,9 GHz misst Protek M733 durchschnittliche Watt HF-Signale von 2 mW bis 500 mW mit Alarmsystem LCD-Anzeige mit Auto-Skala und Einheiten-Wahlfunktionen
Protek M733
Features
Light weight hand-held instrument
Frequency range: 10 MHz to 2,9 GHz
Hold / Run Modes
Meter zero, Auto range functions
3 ½ Digits LCD
CW Power 0,1 mW to 500 mW ( limited duration up to 1 W )
Full-scale ranges:1,999 mW, 19.00 mW, 199,9 mW, 1999 mW
Rugged design
Low Battery detect and display
Unit display: dBmV, mVm dBm, mW
Applications
IF and RF system test
RF amplifier test
CATV testing and troubleshooting
Wireless consumer product test
Base station testing and troubleshooting
Two-way radio
Field Service
Trunk radio
Cellular and PCS phones
Specifications
Frequency Range 10 MHz to 2,9 GHz
RF Signal Input Power Range 2 mW to 500 mW Max
Accuracy + 20°C to + 30°C
+/- 10%[mW]@10MHz to 1 GHz
+/- 15%[mW]@1 GHz to 2,9 GHz
+ 10°C to + 20°C, + 30°C to + 40°C
+/- 15%[mW]@10MHz to 1 GHz
+/- 20%[mW]@1 GHz to 2,9 GHz
Meter Buttons Function
Power Switch Botton: Meter Power ON/OFF
Zero Button: Meter Value Zero Point Function
Hold Button: Meter Value Holding Function
Unit Button: Unit Selection [mW, dBm, mV, dBmV]
Extra Functions
Auto Scale Function
“LoBAT” Message Output Function ( Low Battery )
“HPI” Message Output Function ( High Power Input )
“LPI” Message Output Function ( Low Power Input )
LCD Type Mono, FDTN LCD
Input Connection
N-Type female, 50 Ohm Return Loss < - 18 dB
N-Type to SMA Female Adaptor ( Option )
Battery
9 V Battery Block x 2 pcs
Operating Temperature + 10°C to + 40°C
Operating Humidity 35 RH to 85 RH ( relative Humidity )
Storage Temperature + 20°C to 70°C
Dimension 89 mm (W) x 160 mm (H) x 45,7 mm (D)
Weight max. 900 g ( 2 Pounds )