Marking- and Cleaning tools (EN)

The AMF-writers and AMF-Markers are tools for the permanent marking of workpieces. They are preferably clamped in collets and weldon chucks and mounted in the machine spindle of a CNC machine. Marking is accomplished through a combination of material compression and displacement, which we call „drumming“. That means, the marking is made using a special needle with an extremely hard ball. The tool works both with and without spindle rotation. Thanks to the special design and very high quality guides, this tool can provide an even and high-quality marking without height adjustment by the spindle, for smooth and rough surfaces that can be uneven by between 3 and 7 mm. The adaptation to different materials, material hardness and implementation of different marking depths is infinitely adjustable. This tool is particularly economical thanks to the low acquisition costs, long service life and tremendous time savings. Your benefits at a glance: > the surface is not weakened or damaged, but is compressed and thus strengthened > high marking speeds are possible > high wear resistance and thus long service life > also suitable for thin-walled workpieces > no burrs appear on the marking line > high-quality type face > unevenness of the workpiece is compensated for (see Fig. 1) > also suitable for marking round surfaces (up to 15°) > depending on the design, it is possible to mark surfaces with a hardness of up to 57 HRC > no generation of noise